Installation; What You Need To Get Started - National Instruments IMAQ PCI-1407 User Manual

Installation

What You Need to Get Started

© National Instruments Corporation
This chapter lists items you need to get started acquiring images with
your IMAQ device. This chapter also describes optional equipment and
custom cables and explains how to unpack, configure, and install your
IMAQ device.
To set up your 1407 device, you will need the following items:
❑
One of the following 1407 devices:
– PCI-1407
– PXI-1407
❑
Getting Started with Your IMAQ System
❑
NI-IMAQ Release Notes
❑
IMAQ PCI/PXI-1407 User Manual
❑
NI-IMAQ for Windows 2000/NT/Me/9x and online documentation
❑
Optional software packages and documentation:
– IMAQ Vision for LabVIEW or Measurement Studio
(LabWindows/CVI, Visual C++, Visual Basic)
– IMAQ Vision Builder
– LabVIEW
– Measurement Studio (LabWindows/CVI, Tools for Visual Basic)
❑
IMAQ BNC-1 shielded, 75 Ω BNC cable for VIDEO (included
with your PCI-1407)
❑
Your Pentium-based PCI, PXI, or CompactPCI computer running
Windows 2000/NT/Me/9x
❑
An analog video camera or other video source. See Appendix A,
Specifications, for supported formats.
2-1
2
IMAQ PCI/PXI-1407 User Manual