Getting Started; Setting Up Your Device; What You Need To Get Started - National Instruments NI ELVIS III Getting Started

Getting Started

The getting started guide provides step-by-step instructions on how to connect the
NI ELVIS III hardware, launch the Soft Front Panels (SFPs) from Measurements Live,
and develop applications on the NI ELVIS III using the NI ELVIS III Software Bundle.
If you are a...
Student
Lab administrator
Professor

Setting up Your Device

This section provides step-by-step instructions on how to connect and set up the
NI ELVIS III workstation.

What You Need to Get Started

■
Installing and Powering the Hardware
■
Connecting the Device to Your Host Computer
■
Configuring the Device
■
What You Need to Get Started
Where to go
Getting Started with Measurements
■
Live
Creating an NI ELVIS III Application with
■
LabVIEW
Programming the NI ELVIS III with
■
Python or C
Note
If your lab administrator has
not set up the hardware and
software for you, set up
and the host computer
Guide for Lab Administrators—Instructs you to
set up lab devices, computers, and servers.
Act as a lab administrator or refer to
with NI ELVIS III.
NI ELVIS III Getting Started
your device
first.
Teaching
© National Instruments
3