Traceable Recalibration
© National Instruments Corporation
Traceable recalibration is divided into three different areas—factory,
on-site, and third party. Devices typically require this type of recalibration
every year.
If you require factory recalibration, send the NI 447X back to NI. NI sends
the device back to you with a new calibration certificate. Please check with
NI for additional information such as cost and delivery times.
If your company has a metrology laboratory, you can recalibrate the
NI 447X at your location (on-site). You also can send the NI 447X to a third
party for recalibration. Please contact NI for approved third-party
calibration service providers.
Calibration documentation and function libraries are available online at
ni.com/calibration
.
4-3
Chapter 4
Calibration
NI 447X User Manual