Timer Options - Dish Network 118523 User Manual

For example, having six programs scheduled to record at the same time cannot
be done on a dual-tuner receiver; therefore, the receiver will record only the two
programs with the highest priorities.
• All timers have a priority that you can change at any time.
• The larger the number, the lower priority (for example, priority 1 is
higher than priorities 2, 3, and 4).
• You can override a specific timer's priority with a one-time skip or by
restoring it. Select a timer in the
option to
Skip

Timer Options

The screen lets you set the following (not used on all options
Timer Options
screens):
•
Protect Event
receiver fills up.
• - Select a specific channel.
Set Channel
• - Select this option if you want to begin recording a few
Start Early
minutes early.
• - Select this option if you want to continue recording after the
End Late
scheduled program ending.
:
Note DVR Timers
time of 60 minutes to allow for overtime.
Timers List
The shows you all of the timers you have set up on your receiver.
Timers List
Use the as described on page 73 to:
Timers List
• View the general list of timers.
• If you select a timer from this list, you'll see a detailed list with specific
dates and times of upcoming timers for that program or
search term(s).
• Set user-selected priorities for each timer. See Timer Priorities in the
previous section.
Daily Schedule
or for that timer.
Restore
- Prevents your programs from being erased when the
set for sporting events automatically have a late end
Using Timers and Recordings
, then you'll have an
DISH Pass
Page 71