Chapter 2 - Receiver Description And Installation; Receiver Front Panel; Smart Card Door - Dish Network 118523 User Manual

Chapter 2
Receiver Description and Installation

Receiver Front Panel

Smart Card Door

Behind this door is a slot for a future smart card. No smart card is included with
this receiver.
Indicators
• - The green light indicates that the receiver is providing
TV1 Power
programming to the nearby TV through the
• - The blue light indicates that the receiver is providing
TV2 Power
programming to the remote TVs through the
• - Indicates that the receiver is recording.
Recording
have recording indicators.
• - Indicates if the receiver is in
Mode
details).
Buttons
The buttons on the receiver give you some control of the receiver. Most of the
time you will want to use the remote controls that came with your receiver.
- Press the receiver MODE button to switch between
•
Mode
mode (see page 49 for details).
Dual
• - Displays the
System Info
• - Displays the
Menu
ARROWS and SELECT buttons to navigate through
•
Arrows/Select
ARROW and SELECT buttons on Remote Control 1.
• - Press the POWER button to turn the
Power
to the nearby TV.
IR Sensor
The INFRARED (IR) SENSOR receives IR signals from Remote Control 1.
Single
System Info
. After you press this button, use the
Main Menu
- Use the ARROWS and SELECT the same way as the
output connections.
TV1
output connections.
TV2
and
TV1 TV2
or mode (see page 49 for
Dual
Single
screen on the nearby TV.
's menus.
TV1
programming on or off
TV1
each
and
Page 23