Changing The Tv1 And Tv2 Output Channels - Dish Network 118523 User Manual

Changing the TV1 and TV2 Output Channels

The receiver comes preset to use channel 3 for
. If you are experiencing interference on the channels you are using, follow
TV2
these instructions to change the channel that
Make sure you are familiar with how to change channels on
your TV and if necessary how to switch your TV between
off-air and cable channels. When you change these receiver
output channels, you must also change the channels on your
TV(s) to tune to these channels to see the video from the
receiver. See your TV user guide for instructions.
1. Press MENU-6-1-5 to open the
2. For , highlight the number under
TV 1 Out
step 4.
3. Use the UP and DOWN ARROW buttons to change the modulator channel
either or . Continue to the next step to set
3 4
you are finished making changes.
4. For , select either
TV 2 Out
cable channel numbers).
5. Highlight the number under
6. Use the UP and DOWN ARROW buttons to change the modulator channel
to one of the following:
• - Select a channel between
Air Mode
•
Cable Mode
7. Select to save the changes.
Done
8. Change the channel on your TV(s) to match the channel(s) you selected.
9. If desired to remind you of which TV channel to tune to get satellite
programming, place a channel sticker near or on your TV to indicate the
correct channel.
10. If you changed your
Button for a Remote TV on page 35.
Modulator Setup
(for off-air channel numbers) or
Air
.
TV 2 Out
- Select a channel between
channel, repeat Programming the Recover
TV 2 Out
Changing the TV1 and TV2 Output Channels
and off-air channel 60 for
TV1
or uses.
TV1 TV2
screen.
. For
TV 1 Out TV 2 Out
or skip to step 7 if
TV 2 Out
Cable
and .
21 69
and .
73 125
Tip: It's easier to
set the output
channel from the
opposite TV. For
example, if you are
changing the out-
put on TV1 (nearby
TV), use TV2
(remote TV) to
make the change.
When you save the
changes, simply
remember to
, skip to
change the chan-
nel on the nearby
TV.
(for
Tip: The channel
stickers are located
inside the front
cover of this guide.
Page 37