Dish Network 118523 User Manual page 113

Chapter 3
Using the System
Tip: Limited mode is
not used with audio
amplifiers.
Page 108
Instructions
If you are repeating this
procedure to program a
combination device, be sure to
press the correct mode button
(for example, if you have a
TV/VCR combination and
you have already programmed
the remote to control the TV,
press and hold the VCR mode
button as described above).
4. For AUX mode only:
• Press 0 for a second TV.
Press 1 for a second VCR
•
or DVD player.
• Press 2 for a tuner or
amplifier.
5. Enter one of the three-digit
device codes from the table
using the number buttons.
6. If you want to program
limited mode, press 1. If not,
skip to step 7.
7. Press the POUND (#) button.
8. Press the blank POWER
button to turn off the device. If
the device does not turn off,
go to step 10.
9. Turn the device back on and
try some other buttons to
make sure they work. If the
code works for other buttons,
stop here.
10. If the code doesn't work, redo
steps 3 through 9 with another
device code from the tables.
11. For combination devices:
Repeat this procedure from
step 3.
12. If you can't find a code that
works try Scan for Device
Codes that follows.
Additional Information
This step is for programming which
kind of device that should be
programmed in AUX mode. If
you're not programming in AUX
mode, skip to step 5.
The three-digit device code should
be for the brand name of your device
that you found in step 2.
See Limited Mode for more
information.
If you entered the code correctly, the
mode button flashes three times.
If the code works, the device should
turn off.
Sometimes the blank POWER
button works when other buttons
don't.
Try every code listed for you brand
until one works for your device.