Setting The Sleep Timer - Denon ADV-M71 Operating Instructions Manual

ENGLISH
(6) Setting the sleep timer (remote control unit only)
• The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes. (Sleep timer)
• Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes).
Example: To set the power to the standby mode in 50 minutesaccording to the clock. Be sure to correct the current time setting.
Set the remote
control selector
switches to A/V
and IN/SURR..
TUNER TV / VCR
A / V DVD
SYSTEM MD
CDR TAPE
1
Select and play the desired function.
2
Press the SLEEP button.
• "120" is displayed and the "SLEEP" indicator flashes.
120
The display switches as follows each time the SLEEP
button is pressed:
120 90
3
When the "SLEEP" indicator is flashing, press the SLEEP
button again until "50" is displayed.
• "50" is displayed and the "SLEEP" indicator flashes.
50
• After 4 seconds, the display returns to as it was before the
sleep timer was set, and the "SLEEP" indicator stops
flashing, remaining lit. (This completes the sleep timer
setting.)
4
The power is set to the standby mode 50 minutes later.
To turn the sleep timer off, press the SLEEP button repeatedly until
the "SLEEP" indicator turns off. The sleep timer can also be
turned off by press the power button on the main unit or the
remote control unit to turn the entire system's power to the
standby mode.
SLEEP
SOURCE
Remote control unit
90
OFF
VCR
REC
SLEEP NTSC/PAL
2,3
SOURCE
ENTER CHARAC.
CLEAR A-B REPEAT SLIDE MODE
PROG/DIRECT REPEAT RANDOM
MODE MEMO
DVD TUNER
1 2
MD/LINE-1 TAPE /LINE-2
IN/SURR. 4 5
5CH STEREO AUTO DECODE
IN/SURR.
7 8
DIRECT STEREO
0
CALL
/10
TEST TONE INPUT MODE SURROUND
SLEEP
SOURCE
SLEEP
Remote control unit
60 50 40 30 20
"SLEEP" indicator off
SLEEP
SOURCE
SLEEP
Remote control unit
ON / STANDBY
Main unit Remote control unit
NOTES:
• If the SLEEP button is pressed while the sleep timer is
ON
TITLE TIME
operating, the setting returns to 120 minutes. Make the setting
TV IN T V
EDIT/MENU
ZOOM
- + over.
TV CH TV CH
CD SRS
SEARCH MODE
BAND • If the sleep timer and everyday timer settings overlap, the sleep
TUNING /
TV VOL
D.AUX
+ timer has priority.
3
-
6
TUNER
+
9
CH Everyday timer
VIRTUAL
-
+ 10
once timer setting
FUNCTION
Sleep timer
setting
Timer operation
• Also, the everyday timer will not operate if its start time is set
within the time during which the sleep timer is operating.
Everyday timer
once timer setting
Sleep timer
setting
• The remaining time of the sleep timer can be checked with the
10
STATUS button.
OFF
8:00p.m. 9:00p.m.
ON
+
ON OFF
If the timers overlap like this, the timer operates as follows:
8:00p.m. 9:00p.m.
ON OFF
8:00p.m. 9:00p.m.
Does not operate
ON
+
ON OFF
10:00p.m.
OFF
10:00p.m.
Does not operate
10:00p.m.
OFF