Changing The Default Settings (Dvd) - Denon ADV-M71 Operating Instructions Manual

19 CHANGING THE DEFAULT SETTINGS (DVD)

2 The initial setting that was set prior to shipping from the factory can be changed.
The setting contents are maintained until they are next changed even when the power is switched off.
1
In the stop mode, press the SETUP button.
At the Setup Menu, use the • and ª cursor buttons to select
"DVD SETUP" and press the ENTER button.
2
The setup (default settings) screen "DVD SETUP MENU"
appears.
• DISC SETUP
Use this to set the language to be used when playing the
disc.
If the set language is not offered on that disc, the discs
default language is set.
• OSD SETUP
Use this to set the wall paper color.
• VIDEO SETUP
Use this to set this unit screen mode.
(TV aspect and TV type.)
• AUDIO SETUP
Use this to set this unit audio output mode.
(Digital and LPCM output settings.)
• RATINGS
Use this to disable playback of adult DVDs so that children
cannot watch them. Note that playback of adult DVDs
cannot be disabled if the rating level is not recorded on the
DVD, but that it is possible to disable playback of all DVDs.
• OTHER SETUP
Closed captions (subtitles) and the time interval for playing
still pictures can be set.
Use the 0 and 1 cursor buttons to select the desired setting
item, then press the ENTER button.
To exit the DVD setup mode
Use the 0 and 1 cursor buttons to select "EXIT SETUP", then press the ENTER button. It is also possible to quit by pressing the SETUP
button on the remote control unit.
SETUP
Remote control unit
d
Remote control unit
d
ENTER
Remote control unit
Remote control unit
d
ENTER
Remote control unit
ENGLISH
91