Turning The Everyday Timer And Once Timer On And Off - Denon ADV-M71 Operating Instructions Manual

ENGLISH

(3) Turning the everyday timer and once timer on and off

• After the timer has been set using the procedure described under "(2) Setting the everyday timer and once timer" (pages 85 to 86), turn the
everyday timer and/or once timer on so that the set operations will be performed.
B
DVD SURROUND RECEIVER ADV-M71
ON / STANDBY
1
Press the MENU/SET button to set the timer standby setting
mode.
• The current settings are displayed.
1 o n / E o n
2 Turn the SURROUND/SELECT knob and select the timer to be
operated.
• The display switches as follows
each time the
SURROUND/SELECT knob is
turned:
1 o n / E o n
1 o f f / E o n
1 o n / E o f f
1 o f f / E o f f
• When either the once or everyday timer is activated, the
timer standby indicator
normal about 4 seconds after the timer standby indicator
is displayed.
The timer operation is performed when the SURROUND/SELECT
knob has been turned and the timer standby indicator
been lit.
If you do not want the timer to operate,
turn the SURROUND/SELECT knob to turn
the timer standby indicator
88
2
SURROUND / SELECT
PUSH - PARAM.
+
-
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
FUNCTION
PHONES
1
MENU/SET
Main unit
SURROUND / SELECT
PUSH - PARAM.
Main unit
Both the once timer and everyday
timer are activated.
Only the everyday timer is activated.
Only the once timer is activated.
Neither the once timer nor the
everyday timer are activated.
lights. The display returns to
has
SURROUND / SELECT
PUSH - PARAM.
off.
Main unit
• If only the once timer is set, the setting
changes as shown below each time the
SURROUND/SELECT knob is turned.
1 o n / E o f f 1 o f f / E o f
• If only the everyday timer is set, the setting changes as follows:
1 o f f / E o n 1 o f f / E o f
NOTES:
• The timer standby indicator
has not been set. Set the current time before setting the timer.
(See page 84.)
• If the times set for the everyday timer and once timer overlap,
the once time has priority.
• Be sure to set the power to the standby mode when you want
the timer to operate.
SURROUND / SELECT
PUSH - PARAM.
f
Main unit
f
does not light if the current time