System Functions; Auto Power On Function; Auto Function Selection - Denon ADV-M71 Operating Instructions Manual

ENGLISH
20

SYSTEM FUNCTIONS

2 Making system connections between the ADV-M71 and the D-M31 series cassette deck (DRR-M31) makes operation even easier. (For
instructions on connections, refer to "Connecting to D-M31 Series System Components" on pages 8 to 9.)
2 System functions will not work properly if the input/output function settings are not right for the connected components. Be sure to set the
input/output functions for the components being used. (See page 37.) The setting contents are maintained until they are next changed even
when the power is switched off.

(1) Auto power on function

• When the play/pause button on the main unit (
the standby mode, the ADV-M71's power turns on automatically, and if a disc is loaded in the ADV-M71 the disc is played.
B
DVD SURROUND RECEIVER ADV-M71
ON / STANDBY
1

(2) Auto function selection

• At the touch of a button, the function switches automatically to
"DVD" and disc playback begins.
B
DVD SURROUND RECEIVER ADV-M71
ON / STANDBY
1
104
/ ) or the DVD play button on the remote control unit (
1 3
1
SURROUND / SELECT
PUSH - PARAM.
- +
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
FUNCTION
PHONES
CH
DIRECT STEREO VIRTUAL
-
+ 10
0
CALL
/10
TEST TONE INPUT MODE SURROUND FUNCTION
TUNER TV / VCR
A / V DVD IN/SURR.
SYSTEM MD IN/SURR.
CDR TAPE
1 2 +
DVD
8 9
-
6 7
STATUS
3 MUTING
SETUP TONE /SDB
ENTER
1
SURROUND / SELECT
PUSH - PARAM.
- +
BAND
MENU / SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
FUNCTION
PHONES
CH
DIRECT STEREO VIRTUAL
-
0 + 10
CALL
/10
TEST TONE INPUT MODE SURROUND FUNCTION
TUNER TV / VCR
A / V DVD IN/SURR.
SYSTEM MD IN/SURR.
CDR TAPE
1 2
+
DVD
8 9
-
6 7
STATUS
3 MUTING
SETUP TONE /SDB
1 When the ADV-M71 is in the standby mode, the power can be
turned on simply by pressing the play/pause button on the
main unit or the DVD play button on the remote control unit.
If a disc is loaded, playback starts.
The auto power on function also turns the
power on when the disc holder is opened
while the ADV-M71 is in the standby mode.
• To listen to a radio program, simply press
one of the tuner preset buttons ("+" or "–")
on the remote control unit. The power turns
on and a station is tuned in.
• The power on function works in the same
way when system connections are made
with the D-M31 series cassette deck (DRR-
M31). For details, refer to the respective
component's operating instructions.
1 Press the play/pause button on the ADV-M71 or the DVD play
button on the remote control unit while a component than
the DRR-M31 (cassette deck) is playing.
• Playback on the
other component
stops, the ADV-
M71's function
switches to
"DVD" and if a
disc is loaded
playback of the
disc starts.
• To listen to a radio program, simply press
one of the tuner preset buttons ("+" or "–")
on the remote control unit.
• Auto function selection works in the same
way when system connections are made
with the D-M31 series cassette deck (DRR-
M31). For details, refer to the respective
component's operating instructions.
• Auto function selection does not work for components connected
using the AUX or D.AUX input/output terminals.
) is pressed while the power is in
1
1
DVD
Main unit Remote control unit
Main unit
TUNER
+
CH
-
Remote control unit
1
DVD
Main unit Remote control unit
TUNER
+
CH
-
Remote control unit