Using The Timer - Denon D-F10 Manual

i
USING THE TIMER
The time and timer functions are incorporated in the tuner.
@Types of timer operations
TIMER : Use this to turn the power on and off at the same times every day.
SLEEP TIMER Use this to set the power to turn off after 10 to 60 minutes, in steps of 10 minutes (operated from the
remote control unit).
W Notes on timer settings
@ Be sure to set the current time beforehand.
@ To listen to or record a radio program ("air check") using the timer, be sure to preset the station beforehand. (Refer to
"Presetting AM and FM Stations" on Page 10.)
Should there be a power failure or should the power cord be unplugged, the time display will flash at " 00:00 ". If this
happens, reset the current time.
Also check the timer and tuner presettings, and reset them if they have been cleared.
To check the tirner settings, press the TIMER/ TIMER STANDBY button for at least 3 seconds. (This can also be done when the
tuner's power is off.) Next, press the ENTER/NEXT button repeatedly to display the timer start mode, the reception band and
preset channel number when in the tuner mode, the on time and the off time. Press the ENTER/NEXT button once more to
return to the current mode display.
Changing the Settings
Repeat the timer setting operation to erase the previous settings and set the new settings.
Clearing the Settings
Press the TIMER/TIMER STANDBY button for at least 3 seconds, then press it again while "FUNC" is displayed to clear the
timer settings.
Note on Setting the Timer
If the time set with the timer is reached while the system power is on, the operation switches to the operation set by the timer.
Turning the Timer Off
Press the TIMER/TIMER STANDBY button to turn the © mark off.
12
Tuner ({UTU-F10}
60
B7.SG.peas.
Press the CLOCK/DISPLAY button
for at least 3 seconds.
Use the UP and DOWN buttons
to set the hours.
Press the MEMO ENT/NEXT button.
Use the UP and DOWN buttons
to set the minutes.
Press the MEMO ENT/NEXT button
at the sound of a time service's chime,
The time display stops flashing and
the clock starts running.
e The current time can be set even when the power is off.
@ If an RDS station offers a time service, the time can be set by pressing the CT button on the remote control unit while that
Station is tuned in.
Lie G 0 The hours place flashes.
(If the hours have already been set, that number flashes.}
Meena
7 [np bs bs The hours place flashes.
ahaa
The minutes place flashes.
Ak
{If the minutes have already been set, that number flashes.)
1 Gg "rhe The minutes place flashes.
t . NON
{ G . 34 tT? The display stops flashing and
Le e the clock starts running from
00 seconds.
NOILOAS TWHAINID