Setting The Parameters In The Plii Cinema/Music And Pro Logic Modes - Denon ADV-M71 Operating Instructions Manual

ENGLISH
[3] Setting the parameters in the PLII Cinema, PLII Music and Pro Logic modes
• When PLII Cinema, PLII Music or Pro Logic is selected for the 2-channel mode, detailed parameters can be set for each of these modes.
PLII Music mode: Make the settings using the procedure below.
• Program sources including the
processing and played in the multi-channel mode.
q PLII Cinema mode: This mode is suited for movies and other Dolby Surround programs.
w PLII Music mode: This mode is suited for stereo music programs.
e Pro Logic compatible mode: This is the original Dolby Surround Pro Logic mode.
1
Select "PLII C", "PLII M" or "PRO LOGIC" for the 2-channel
mode setting.
2
Set the surround parameters for the selected mode.
• The parameters switch as shown below each time one of
the buttons is pressed.
SURROUND / SELECT
PUSH - PARAM.
Main unit
PL CINEMA
DEFAULT
60
CD SRS
PROG/DIRECT REPEAT RANDOM SEARCH MODE
MODE MEMO BAND
TUNING /
TV VOL
DVD TUNER D.AUX
+
1 2 3
MD/LINE-1 TAPE /LINE-2
-
4 5 6
TUNER
5CH STEREO AUTO DECODE
+
7 8 9
CH
DIRECT STEREO VIRTUAL
-
+ 10
0
CALL
/10
TEST TONE INPUT MODE SURROUND FUNCTION
TUNER TV / VCR
A / V DVD IN/SURR.
SYSTEM MD IN/SURR.
CDR TAPE
1 2 +
DVD
8 9
-
6 7
STATUS
3 MUTING
SETUP TONE /SDB
3
ENTER
SURROUND
CH SELECT PARAMETER
2
- +
VCR CH
RETURN DISPLAY MENU TOP MENU
ANGLE AUDIO SUB TITLE
RC-936
SURROUND
PARAMETER
Remote control unit
PL MUSIC PRO LOGIC
PANORAMA DEFAULT
DIMENSION
CNTR WIDTH
DEFAULT
mark and CDs and other 2-channel sources are decoded with Dolby Pro Logic II
3
Set the various surround parameters.
• Panorama setting
P A N O R A O N O F F
The selected setting flashes.
• Dimension setting
D I M E N S I O N 3
0
• Center Width setting
C N T R W I D T H 3
0
• Default setting
D E F A U L T
YES
When "YES" is selected, the settings are restored to the
factory defaults.
Once the surround parameters have been set, stop operating the
buttons. After several seconds, the normal display reappears and
the settings are automatically entered.
This completes the setting of the parameters.
NOTES:
• The 2-channel mode is set and stored in the memory individually
for the different functions.
SURROUND / SELECT
PUSH - PARAM.
Main unit Remote control unit
ON OFF
, /
... ...
3 6
, /
... ...
3 7
, /
Y / N
/
Y N NO
, /