Detailed System Setup - Denon ADV-M71 Operating Instructions Manual

(3) Detailed system setup (changing the system settings)
• The quick system settings and original settings set upon shipment from the factory are changed using the system setting changing menu. The
settings are stored in the memory until they are changed the next time, and remain valid even when the power is turned off.
[1] Speaker settings (type of speaker and whether or not the speaker is connected)
• The output component of the different channels and properties are adjusted automatically according to the combination of speakers actually
used.
1 Press the SETUP button to display the
setup screen.
2 Use the • and ª cursor buttons to select "SYSTEM SETUP"
under " < ADVANCED SETUP > ", then press the ENTER
button.
Remote control unit
3 At the system setting changing menu, use the
cursor buttons to select the "SPEAKER CONFIGURATION"
tag icon, then press the ENTER button.
3
SETUP
Remote control unit
4
ENTER
Remote control unit
1
0 and
5
Remote control unit
When the cursor is at a tag icon on the system setting
changing menu screen, the settings screen can also be
selected by pressing the ª cursor button. You can return to
the tag icon by pressing the • cursor button.
• The speaker settings screen in step 4 appears.
Use the • , ª,
1 cursor buttons to select whether or
0 and
not the various speakers are connected, their size and other
parameters.
CENTER SPEAKER
FRONT SPEAKERS
SUB WOOFER
Remote control unit
SURROUND
SPEAKERS
• The item currently being set is displayed in yellow, and the
setting values for other items are displayed in green.
Press the ENTER button to enter the
settings.
• The next screen in the system setting
changing menu appears.
ENGLISH
ENTER
Remote control unit
ENTER
Remote control unit
33