Connecting The Antenna Terminals; Am Loop Antenna Assembly; Connection Of Am Antennas - Denon ADV-M71 Operating Instructions Manual

ENGLISH

(5) Connecting the antenna terminals

DIRECTION OF
BROADCASTING
STATION
FM ANTENNA
• An F-type FM antenna cable plug can be connected directly.
• If the FM antenna cable's plug is not of the F-type, connect using the F-type antenna adapter (Option).

AM loop antenna assembly

1
Remove the vinyl tie
and take out the
connection line.
4
a. With the antenna
on top any stable
surface.
b. With the antenna
attached to a wall.
Installation hole Mount on wall, etc.
12
75 Ω/ohms
COAXIAL
CABLE
FM ANTENNA
ADAPTER
(Option)
Connect to the AM
antenna terminals.
2
3
Bend in the reverse
direction.
Mount
FM INDOOR ANTENNA
(Supplied)
GROUND

Connection of AM antennas

1. Push the lever.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to
Article 820-40 of the NEC which provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as
practical.
NOTES:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM loop
antenna.
• Make sure AM loop antenna lead terminals do not touch metal parts of the
panel.
AM LOOP ANTENNA
(Supplied)
AM OUTDOOR
ANTENNA
2. Insert the conductor. 3. Return the lever.