Edited Recording - Denon ADV-M71 Operating Instructions Manual

ENGLISH
(4) Edited recording (when the ADV-M71 and DRR-M31 are connected with a system cord)
• The tracks on the CD can be automatically divided into sides A and B for recording according to the length of the cassette tape (tape time). (For
CDs only)
• Edited recording is possible for CDs containing up to 25 tracks. For CDs with 26 tracks or more, editing is not possible.
Example: Recording a CD with 16 tracks and a total playing time of 56
minutes onto a C-60 (60-minute) cassette tape
Main unit ADV-M71
B
DVD SURROUND RECEIVER ADV-M71
ON / STANDBY
1
Cassette deck (DRR-M31)
CASSETTE DECK DRR-M31
DOLBY NR
ON
OFF
ON / STANDBY
6
1 Turn on the ADV-M71's power.
• The system's power turns on.
2 Open the cassette holder, load the
cassette tape onto which you want to
record, then close the cassette holder.
Load the cassette tape with side A
facing up.
3 Press the FUNCTION button and switch the function to
"DVD".
106
4 4 6
SURROUND / SELECT
PUSH - PARAM.
- +
BAND
MENU/SET
VIRTUAL SPEAKER
TONE / SDB
VOLUME
FUNCTION
PHONES
3
2 2
PLAY
CD SRS
REC
CD SRS REC 0 PLAY 1
REVERSE
MODE
1
OFF ON
VCR
REC
SLEEP NTSC/PAL TITLE TIME
SOURCE TV IN T V
ENTER CHARAC. EDIT/MENU
CLEAR A-B REPEAT SLIDE MODE ZOOM
- +
TV CH TV CH
CD SRS
PROG/DIRECT REPEAT RANDOM SEARCH MODE
MODE MEMO BAND
TUNING /
TV VOL
DVD TUNER D.AUX
+
1 2 3
MD/LINE-1 TAPE /LINE-2
-
4 5 6
TUNER
5CH STEREO AUTO DECODE
+
7 8 9
CH
DIRECT STEREO VIRTUAL
-
0 +10
CALL
/10
TEST TONE INPUT MODE SURROUND FUNCTION
3
TUNER TV / VCR
A / V DVD IN/SURR.
SYSTEM MD IN/SURR.
CDR TAPE
1 2 +
DVD
8 9
-
6 7
STATUS
ON / STANDBY
ON
ADV-M71 Remote control unit
DRR-M31
FUNCTION
FUNCTION
ADV-M71 Remote control unit
4 Open the ADV-M71's disc holder, load the CD, then close the
disc holder.
1 6 T r 5 6 : 0 0
5 Press the MENU button on the
remote control unit and set the length
of the cassette tape onto which you
are going to record.
• For example, for a 60-minute
cassette tape, press the edit button
twice. (The length of the cassette
tape is the total time for sides A and
B.)
T a p e E d i t C - 6 0
The display switches as follows each time the MENU
button is pressed.

Edited recording

canceled
About 4 seconds after setting the length of the cassette
tape, the numbers of the tracks to be recorded on side A
and the remaining time for side A on the cassette tape are
displayed.
(Ex.: When tracks 1 to 9 will be recorded on side A and the
remaining time for side A is 2 minutes 40 seconds)
E 0 1 - 0 9 A 0 2 : 4 0
After this, the display switches every few seconds
between the numbers of the tracks and remaining time for
side B and the numbers of the tracks and remaining time
for side A.
(Ex.: When tracks 10 to 16 will be recorded on side B and
the remaining time for side B is 1 minute 20 seconds)
E 1 0 - 1 6 B 0 1 : 2 0
If "OVER" is displayed for the remaining time, it is not
possible to record all the tracks. Change the cassette tape
length.
To set the cassette tape length to anything other than 46,
60 or 90, use the numeric keypad and +10 button on the
remote control unit while "
time. The time can be set to up to 99 minutes. The time is
input in the same way as when searching for CD tracks
directly.
[Example:] To set the time to 54 minutes
While " " is displayed, press
+10
, 4.
ADV-M71
MENU
Remote control unit
" is displayed to input the
+10 +10 +10 +10
, , , ,