Sound Output From This Unit Digital And Analog Audio Output Connectors - Denon ADV-M71 Operating Instructions Manual

ENGLISH

(7) Sound output from this unit digital and analog audio output connectors

2 When a disc is played on the ADV-M71 (DIGITAL OUT)
Audio recording format
DVD video
DVD audio
(video part only)
Video CD
Music CD
MP3/WMA CD
• Linear PCM audio is the signal recording format used for music CDs.
While the signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96 kHz/24 bit, providing
higher sound quality than music CDs.
2 About the LINE-1 and LINE-2 analog recording outputs
When the DVD or the D.AUX digital input is selected:
• Dolby Digital, DTS, AAC and PCM digital signals are automatically converted to 2-channel stereo signals before being output (except
when in the Dolby Headphone mode) and can be recorded in analog. (For what happens in the Dolby Headphone mode, see 3 below.)
When TUNER, LINE-1 or LINE-2 is selected:
• The selected analog audio signals from the tuner or from the device connected to the LINE-1 or LINE-2 analog input terminals (IN) are
output unchanged, regardless of the ADV-M71's input mode or surround mode. (The same is true for the device connected to the
D.AUX terminals when "LINE-2" under "⁄0 SETTING UP THE SYSTEM – (3) Detailed system setup – [5] Function settings" is set to
"D.AUX".)
Recording output during playback of a DVD, D.AUX or LINE-1 digital input source in the Dolby Headphone mode:
• In the Dolby Headphone mode with a DVD or a digital input selected, the Dolby Headphone mode analog audio signals currently being
played are output and can be recorded in analog. (See pages 57 and 58.)
Cautions during analog recording of DVDs or digital input sources:
• Do not switch the ADV-M71's input mode, surround mode or surround parameters during recording. Doing so will interrupt the
sound being recorded.
We recommend setting the surround mode to "STEREO" or "DIRECT".
• When using headphones, recording is automatically performed in the Dolby Headphone mode. Do not disconnect the headphones
or switch the headphones mode during recording.
14
Digital out : Normal
Dolby Digital
Digital out : PCM conversion
Digital out : Normal
DTS
Digital out : PCM conversion
LPCM conversion mode : OFF
48 kHz
LPCM conversion mode : ON
96 kHz LPCM conversion mode : ON
CP : ON LPCM conversion mode : OFF
CP : OFF LPCM conversion mode : OFF
MPEG 1
Linear PCM
MP3/WMA
Refer to
Settings
page
98
98
Digital audio data output
Dolby Digital bitstream
2 channels PCM data (48 kHz/16bit)
DTS bitstream
2 channels PCM data (48 kHz/16bit)
48 kHz/16 ~24 bit PCM
48 kHz/16 bit PCM
48 kHz/16 bit PCM
48 kHz/16 bit PCM (when copy-protected)
96 kHz PCM (when not copy-protected)
44.1 kHz/16 bit PCM
44.1 kHz/16 bit PCM
32 ~ 48 kHz/16 bit PCM