Table of Contents
Advertisement
2. At the pivot:
•
Install the small POE (Power Over Ethernet) adapter inside the VRI panel.
•
Plug in the RJ45 connector of the adapter cable into the RJ45 socket on the side of the touchscreen
panel.
•
Connect the power lead adapter on the POE to the 12V power supply in the panel.
•
Connect a CAT5 (or CAT6) cable from the adapter to the antenna.
P/N 1600043 Rev M (ECN 34095)
APDX-3
VRI Installation Manual
Appendix
Hide quick links:
Advertisement
Table of Contents
