Vri Basic Control Panel Wiring - Lindsay GROWSMART Installation Manual

VRI BASIC Control Panel Wiring

P/N 1600043 Rev M (ECN 34095)
NOTE: Purple and tan wire connections shown are for either
VRI panel control or Vision/Boss panel control of system end
guns. For VRI panel control configure the VRI panel software
I/O settings for "FieldBoss/Vision" for both the Endgun 1 and
Endgun 2 outputs. If VRI panel control of end guns is not de-
sired, use VRI software settings of "Disabled" for both end gun
outputs. Cap off the unconnected purple and tan wires of the
VRI panel cable with wire nuts for safety.
15 VRI Installation Manual