Inputs
The Inputs column allows the digital inputs to be turned on and off. Press the "Update" button to display the cur-
rent state of all the inputs and allow for selection/de-selection of the inputs.
Analog Inputs
This column displays the current value of the analog inputs in a rage of 0 to 5v is displayed.
Send Command
This function allows for the manual operation of each individual node. Set the node's unique 16-bit MAC address
and set the command for the valves within that node from the drop-down box. If this is the GPS node, its GPS
position can manually requested.
Enable Console Window-Check Box
When this box is checked, the command console window will display all system information for troubleshooting
purposes. De-select the check-box to stop displaying system information.
Clear Window
This button will clear system information in the console window.
P/N 1600043 Rev M (ECN 34095)
21
VRI Installation Manual