P/N 1600043 Rev M (ECN 34095)
FieldNET Settings
Displays communication information to FieldNET
and provides some reporting, Remote and Cache
handling capabilities.
These should only be used by technicians with
wireless network and FieldNET training.
I/O Settings
Used to set the Input signals from
the Main processor to the VRI
panel for the different system pro-
cesses, and Output signals from
the VRI panel to the endguns and
drive motors.
Use the radio buttons to toggle
between the desired input or
output type.
If using Input (or Output), the cor-
rect input or output port will need
to be selected.
Press OK to save and accept any
changes. Select Cancel to ignore
any unsaved changes.
Inputs 2
This tab is a continuation of the Inputs tab.
23
VRI Installation Manual