Node Wiring For New Zealand - Lindsay GROWSMART Installation Manual

Appendix– VRI

Node Wiring for New Zealand

Nodes come pre-wired from the factory. Wiring typically only needs to be addressed if the node is being replaced
or serviced. The following node wiring is only for systems installed outside of the USA.
Compare the wire colors here with the wire colors on the actual node. If they match those here follow this diagram
for wiring the power and valves.
If the wiring matches that on page 4 of this manual, the node is factory wired in the USA, follow that wiring dia-
gram instead.
On occasion the wire colors may change due to the supplier availability. When wiring with a wire color not shown
here, make sure whatever wire color order used at the node, matches the terminal connection wiring order at the
other end of the wire .
MAC Address
Black
White
Black
White
Valve A
P/N 1600043 Rev M (ECN 34095)
Valve B
Positive In–Out
Negative In–Out
Red
Black
APDX-1
White
Black
White
Valve C Valve D
VRI Installation Manual
Black
Appendix