Equipment Installation - Goodwe DNS Series User Manual

4.2 Equipment Installation

4.2.1 Select installation location
Please take the following points into consideration when you are selecting a proper location to
install the inverter.
• Please choose appropriate mounting methods and installation location in terms of weight and
dimensions of the inverter.
• The place must be well ventilated and sheltered from direct sunlight.
• Install the inverter vertically or with a backward tilt within 15 degrees. No lateral tilt is allowed.
The area of the connectors should point downwards.
For convenient dismantling and heat dissipation, the clearance around the inverter must follow
the below diagram.
The installation position shall not block access to the disconnection means.
200mm
4.2.2 Mounting procedure
1. Use the mounting bracket as a template and drill holes (diameter 10mm, depth 80 mm) on the
wall.
2. Fix the mounting bracket on the wall with the expansion bolts in the accessories bag.
3. Hold the inverter by the side groove.
4. Mount the inverter on the wall-mount bracket.
Max
15°
300mm
200mm
500mm
300mm
Upward---------------300mm
Downward-----------500mm
Front-------------------200mm
Both sides------------200mm
06