7.3
Temperature Calibration (Only available in AB15+)
1.
Access the temperature calibration mode by pressing mode key
to go to the absolute mV measure screen
2.
Press std. This will take you to the temperature calibration (MTC
or ATC)
3.
Press save/
or view/
press
to set value
press
std
to standardize
4.
Press std to confirm the reading.
Maximum adjustable temperature offset is
For ATC:
±5°C/ 9°F
For MTC:
- 5 to 105 °C/ 23°F -221°F
to adjust the temperature.
S tandardize
40