Stability Indicator (Only Available In Ab15+) - Fisher Scientific accumet BASIC AB 15 Manual

6 Press enter key to confirm selection OR press mode key to exit
to measurement OR press setup key to access other setup
options.
4.1.6

Stability Indicator (Only available in AB15+)

This setup option allows you to set the stability indicator to be
displayed on the screen whenever reading has stabilized, thus
minimizes guesswork.
To Set Stability Indicator
1. Access the Set Stability Indicator menu from any Measure screen
by pressing the setup key.
2. Use the setup key to scroll until the screen displays the stable
icon is shown.
press setup
press enter
3. Press enter to enable the "STABLE" OR press setup again to
select to disable the STABLE option.
to select options
to accept
17
ST AB L E