Patch Panel; Power Separation Guidelines - CommScope ONECELL RP5200 Hardware Installation Manual

Patch panel

CommScope recommends installing a patch panel in the NOC to connect and manage
CAT-6A cables. The following is a list of recommended CommScope 24 and 48 port
patch panels and high density information outlets.
•
•
•
•
•
•
For more information, go to
representative.

Power separation guidelines

For power separation best guidelines, refer to the following standards:
•
•
•
®
ONECELL RP5200 Hardware Installation, Release 5.5
Appendix D Cable installation and power separation guidelines
760163436_HFTP-HD6B-1U-24
760163444_HFTP-HD6B-2U-48
760163451_HFTPA-HD6B-1U-24
760163469_HFTPA-HD6B-2U-48
760163519_HFTP-J6
760163527_HFTP-J10G
Telecommunications Pathways and Spaces, TIA-569-C
Information technology – Implementation and operation of customer premises
cabling – Part 2: Planning and installation, ISO/IEC 14763-2
Information Technology – Cabling Installation – Part 2: Installation Planning and
practices inside buildings, BS EN 50174-2
CommScope.com or contact your CommScope customer
D-17