About Bluetooth Communications; Connect A Bluetooth Device - Honeywell ScanPal EDA51 Series User Manual

7. Enter a name for the certificate and tap OK.
Disable or Remove Certificates
If a user or system certificate is compromised, or your organization chooses not to
trust it, you can disable or remove the certificate.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Select Trusted credentials.
4. Tap the name of the certificate to you want to disable or remove. The Security
5. Scroll to the bottom of the screen and tap Disable (for System certificates) or
6. Tap OK.
Note: You can enable a disabled System certificate but if you remove a User certificate, you
must install it again to enable it.

About Bluetooth Communications

Your mobile computer is equipped to communicate with other devices using
Bluetooth technology. The Bluetooth radio must be turned On to discover, pair and
connect to other Bluetooth devices. System bar icons indicate Bluetooth radio
status.
To toggle the Bluetooth radio on or off, swipe down from the top of the screen and
tap the Bluetooth icon

Connect a Bluetooth Device

To connect to a Bluetooth device, you must turn on the Bluetooth radio and then
select the device from a list of discovered devices.
1. Verify the Bluetooth radio is on.
2. Swipe up from the bottom of the Home screen to access all apps.
3. Tap Settings
66
> Security > Encryption & credentials.
The trusted credentials screen has two tabs:
• System shows Certificate Authorities (CA) certificates permanently installed
on the computer. They can only be disabled.
• User shows CA certificates you have installed yourself. You can remove these
certificates.
certificate screen appears.
Remove (for User certificates).
> Connected devices.
.
EDA51 User Guide