About Wwan Security - Honeywell ScanPal EDA51 Series User Manual

Add a VPN
Before you can connect to a VPN, you must create a VPN profile.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Enter the required information for the VPN connection. If needed, swipe up on
5. Tap Save. The VPN name appears in the VPN list.
Connect to a VPN
Once a VPN profile is created, you can connect to the VPN at any time.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the name of the VPN in the list.
4. Enter any necessary credentials when prompted.
5. Tap Connect.
Edit VPN Information
Editing an existing VPN profile can be done from the VPN screen.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap and hold the name of the VPN in the list.
4. Tap
5. Edit the VPN settings as necessary.
6. When you are done, tap Save.

About WWAN Security

The computer provides these security solutions for your WWAN network:
•
•
64
> Network & internet > Advanced > VPN.
to add a VPN new profile.
the screen to access all the required information fields.
> Network & internet > Advanced > VPN.
A appears in the status bar and a notification is received.
To disconnect from the VPN, tap the notification.
> Network & Internet > Advanced > VPN.
to the right of the VPN profile you want to edit.
Wi-Fi Protected Access 2 (WPA2™)
Wi-Fi Protected Access (WPA)
EDA51 User Guide