Record A Video; Change Camera Settings - Honeywell ScanPal EDA51 Series User Manual

3. The camera automatically adjusts the focus, but you can tap the screen to
4. Tap

Record a Video

This section explains how to record video with the camera in the computer.
1. Tap the Camera icon
2. Tap
3. When you are done recording, tap
To access the video settings in the Camera app, select the more settings icon
and then the advanced settings

Change Camera Settings

You can change the camera settings for best results when taking pictures. The
camera settings are adjustable from within the Camera app.
1. Open the Camera app
2. At the top of the screen, select any of the following to adjust the settings.
48
modify the focal point. By default, the camera senses the lighting in the
environment and turns the flash on, if needed.
or the Volume button to take a photo.
• To view the picture, tap the preview near the bottom of the screen.
• To return to the Camera app, tap the Back navigation button.
to start recording video.
• To zoom in or out, pinch or spread your fingers apart.
• To toggle sound recording on or off, tap the microphone icon at the top of the
screen.
• To pause recording, select
• To capture a still picture during recording, tap the Camera icon
• To add light while recording, tap the flash icon.
in the favorites tray.
. To resume recording, tap
.
icon.
.
.
.
EDA51 User Guide
,