About The Scan Status Led; About Audio Features; Adjust Speaker Volume - Honeywell ScanPal EDA51 Series User Manual

About the Scan Status LED

The Scan Status LED indicates the read status of the imager when scanning a
barcode. When active, the LED illuminates below the front speaker. To learn more
about how to use and configure the imager engine for scanning, see
Use the Image Engine
Scan Status LED Descriptions
LED Color
Green
Red

About Audio Features

EDA51 has multiple speakers, microphones, and several software tools to
configure sound volume or enable vibration feedback.

Adjust Speaker Volume

Use the Volume button on the side of the computer to adjust the volume of
ringtones, media, notifications, and alarms.
Note: The volume setting varies by OS version.
To quickly change the active speaker volume level:
•
14
beginning on page 31.
Description
Good read of a barcode.
Failure to scan barcode.
Check to make sure you have the correct symbology enabled.
Press the top of the Volume button (+) to raise the volume of the active speaker.
Chapter 3:
Scan Status LED
EDA51 User Guide