Insert A Microsd Card - Honeywell ScanPal EDA51 Series User Manual

Setting
Alarm Volume
Notification Volume
Do not disturb
Shortcut to prevent
ringing
Default notification
sound
Default alarm sound
Other sounds and vibrations
Screen locking sounds
Charging sounds
Advanced

Insert a microSD Card

You can use a microSD card to increase file storage capacity or to install software.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC memory cards with the computer for maximum
performance and durability.
Note: Format the memory card before initial use.
1. Remove the battery from the computer, refer to
2. Insert the MicroSD card.
3. Insert the battery, see on
16
Description
Use the sliders to set the volume for alarms.
Use the sliders to set the volume for notifications.
Select to configure Do Not Disturb feature and to manually turn it on or off.
Select to set the shortcut button sequence Volume up and Power to
enable Vibrate , Mute or turn the feature on or off.
Select the default sound for notifications.
Select the default sound for alarms.
Enable or disable an audio tone when the screen is locked.
Enable or disable an audio tone when the computer is charging.
Enable or disable sound and/or haptic (vibration) feedback when you
touch the screen.
• Touch Sounds
• Touch Vibration
Micro SD Card
page 7.
page 6.
EDA51 User Guide