Directed Directechs DS3+ Installation Manual
Hide thumbs
Also See for Directechs DS3+:
- Installation manual (35 pages) ,
- Installation manual (23 pages) ,
- Installation manual (25 pages)
Table of Contents
Advertisement
Quick Links
INSTALLATION GUIDE
DS3+ / DS4+
2010 Volkswagen Jetta SportWagen. 933.VW10 2.00.195.3
Designed by Installers for Installers
© 2022 Directed, Vista CA
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle's
electrical system and components.
Advertisement
Table of Contents
Related Manuals for Directed Directechs DS3+
Summary of Contents for Directed Directechs DS3+
- Page 1 2010 Volkswagen Jetta SportWagen. 933.VW10 2.00.195.3 Designed by Installers for Installers © 2022 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s...
-
Page 2: Table Of Contents
Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Installation Wiring diagram with T-Harness (THVWN1) Wiring diagram Locating components in the vehicle Immobilizer interface with OEM immobilizer receiver Key wrap options for THVWN1 Vehicle connections Module programming For Security-Onlyprogramming, see next section. Module programming for security-only installations Pairing remotes Connecting the module... -
Page 3: Introduction
Introduction This guide provides information on the installation of the DS3/DS3+ and DS4/DS4+ modules as a digital solution. Using these modules in a digital configuration require the module to be flashed with vehicle specific firmware. Refer to our website (www.directechs.com) and click on the DIRECTLINK text in the header for additional information. -
Page 4: Vehicle Function Compatibilities
Vehicle function compatibilities This section lists all the functions compatible with this vehicle for the installation illustrated in this guide. Note: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart. Parking Lights Control Ignition Activation Arm Factory Security RAP Shut Down (Retained ACC Power) Disarm Factory Security Remote Start Takeover... -
Page 5: Pre-Installation And Application Warnings
Pre-installation and application warnings This section highlights important information for this specific firmware and will assist in pricing accordingly, as START HERE well as bringing awareness to any operational or vehicle limitations. Compatibilities and Requirements T-Harness Keys required for Keys required THVWN1 programming for operation... -
Page 6: Installation
Wiring diagram with T-Harness (THVWN1) Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( 42 25 THVWN1 (optional T-Harness) VESCM module can also be used for Driver side under dashboard 8-pin White Connector (+) Brake: Black/Red, pin 17 this installation. -
Page 7: Wiring Diagram
Wiring diagram Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( FT CAN Low: Orange/Brown, pin 15 FT CAN High: Orange/Green, pin 14 HS CAN High: Orange/Black, pin 6 Diagnostic Steering Connector... -
Page 8: Locating Components In The Vehicle
Locating components in the vehicle Optional starter disable connection When using an external relay, use a 1N4002 diode or larger. Note: This connection is not required when using a THVWN1 T-Harness. 1A diode [1N4002+ ] (+) Ignition (-) Ground When Armed (GWA) Output: Blue/White: 2 Refer to the Vehicle connections section for wire and... -
Page 9: Immobilizer Interface With Oem Immobilizer Receiver
Immobilizer interface For vehicles with Keyless Entry you must remove battery from OEM key (the OEM remote may differ from the models shown in the illustrations). Method 1: Key Wrap NO Relay 2: Lt. Green/Red: 7 COM Relay 2: Lt. Green 8 Immobilizer Receiver 4-6 loops... - Page 10 Method 3: Immobilizer interface with OEM Immobilizer Receiver NO Relay 2: Lt.Green/Red: 7 COM Relay 2: Lt.Green: 8 NC Relay 2: Lt.Green/White: 9 4-6 loops Remove battery from OEM Immobilizer Remote Control Receiver Immobilizer ECU - Make 4-6 loops and place them around the front of the plastic body of the vehicle's coded key as shown above. - Make connections to the OEM Immobilizer receiver as shown above.
-
Page 11: Key Wrap Options For Thvwn1
Key Wrap Option 1 with T-Harness (THVWN1) Use the T-harness component labeled Key Wrap - Option 1 for Key type vehicles. Wrap the loop around the OEM Immobilizer Remote and connect to the OEM Immobilizer Receiver Switch as shown below. THVWN1 (main section of T-Harness, connector side view) Key Wrap... -
Page 12: Vehicle Connections
Vehicle connections The connection information listed below is specific to the 2010 Volkswagen Jetta SportWagen. Refer to “Pre-installation and application warnings” for a list of important notes. Data harness, 8-pin white connector (H1) Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection... - Page 13 Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H2/15 White/Blue No Connection No Connection H2/16 Red/Blue No Connection No Connection H2/17 Black/White No Connection No Connection H2/18 Orange/Black No Connection No Connection H2/19 Blue No Connection No Connection H2/20 Green...
- Page 14 Module Connects To Conn./Pin Color Description Wire Location (+/-) Wire Color Connection H4/9 Red/White No Connection No Connection H4/10 Pink No Connection No Connection RF Port harness, 2-pin white connector (H5) Module Conn./Pin Color Description H5/1 H5/2 D2D harness, 4-pin white (1) and black (2) connectors (H6) Module Conn./Pin Color...
-
Page 15: Module Programming
Module programming Refer to “LED diagnostics and troubleshooting” for more information and for troubleshooting purposes. Security-Only programming, see next section. Ensure vehicle is in a safe location, and cannot move forward during programming. For vehicles equipped with a manual transmission, make sure the gearshift lever is in the neutral position. -
Page 16: Module Programming For Security-Only Installations
Module programming for security-only installations Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes. To connect the module: Ensure vehicle is in a safe location and cannot move forward during programming. For vehicles equipped with a manual transmission, make sure the gearshift is in the neutral position. Connect the 12-pin main power harness to the module. -
Page 17: Pairing Remotes
When used in conjunction with Directed SmartStart ® To enable D2D communication between the DS3+/DS4+ and the Directed SmartStart one of the following actions must be performed ® before providing power to the Directed SmartStart unit: ®... -
Page 18: When Used In Conjunction With Smartstart
DO NOT connect the Directed SmartStart ® 2-pin power harness when using the DS3+/DS4+. Power and ground will be provided by the D2D connector on the module. Refer to the Directed SmartStart ® documentation for further details. D2D port configuration Caution! Do not connect the Control Center (antenna) or any digital sensors (8504D) to the white D2D1 port. -
Page 19: Manual Transmission
Manual Transmission IMPORTANT! Directed does not approve nor support installations of manual transmission and remote starts on any electronic vehicles (EV), OEM Remote Start Activation firmware, vehicles with convertibles and/or removable tops, including but not limited to Jeep Wrangler, Honda S2000, Mazda Miata, and other such vehicles. -
Page 20: Led Diagnostics And Troubleshooting
LED diagnostics and troubleshooting This section provides LED diagnostics and troubleshooting information to guide you through the various stages of your installation. Module Programming Description Troubleshooting Make sure the D2D harness is connected and that 12 Volt is present between the red and black wires. If Module has no power. - Page 21 External Module Synchronization Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 Active Ground When Running (Status) Description Troubleshooting Ground When Running (Status) command The module has initialized the remote start sequence.
-
Page 22: Soft Reset
Soft reset A module reset will only erase the steps perfomed in “Module Programming”. The firmware and settings flashed to the module will not be affected. Connect all but the If required for your installation, connect all the harnesses to the module, EXCEPT the 12-pin main 12-pin harness power harness. -
Page 23: Tach Learning Procedure (Not Needed With Virtual Tach)
Tach learning procedure (not needed with Virtual Tach) Data Tach: The procedure is not required as the tach comes preprogrammed. However, it is strongly recommended to learn the exact value of the vehicle for the most consistent and reliable starting and functionality. Hardwired Tach: The procedure is required. -
Page 24: Limited Lifetime Consumer Warranty
Limited Lifetime Consumer Warranty VOXX DEI LLC (the Company) warrants to the original purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or work- manship within the Lifetime from the date of original purchase in the original vehicle, such defect(s) will be repaired or replaced with new or reconditioned product, (at the Company’s option) without charge for parts or repair labor. -
Page 25: Quick Reference Guide (Customer Copy)
3 possible ways you can send commands to your vehicle, using the: Park (P). • Factory remote. • Aftermarket remote. Press the Remote Start button on the transmitter.* • Directed SmartStart application via your smartphone. & Parking lights The parking lights will flash once to indicate the vehicle is Press... - Page 26 The application enables a “Cloud-Connected Car” like never before, providing 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet. For more information, visit www.mysmartstart.com.