Replacing The Mini-Card(S) - Dell Studio 1569 Service Manual

1 antenna cables (2)
3 screw
7. Lift the Mini-Card out of the system board connector.
Replacing the Mini-Card(s)
1. Follow the procedures in Before You
2. Remove the new Mini-Card from its packaging.
CAUTION: Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.
CAUTION: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system
board, and realign the card.
CAUTION: To avoid damage to the Mini-Card, never place cables under the card.
3. With the label on the Mini-Card facing up, insert it at a 45-degree angle into the appropriate system board connector.
4. Press the other end of the Mini-Card down into the slot on the system board and replace the screw that secures the Mini-Card to the system board.
5. Connect the appropriate antenna cables to the Mini-Card. The following table provides the antenna cable color scheme for the Mini-Card(s) supported
by your computer.
Connectors on the Mini-Card
main WLAN (white triangle)
auxiliary WLAN (black triangle)
main WWAN (white triangle)
auxiliary WWAN (black triangle)
2 Mini-Card
4 system board connector
Begin.
Colors of Antenna Cables
white
black
white with gray stripe
black with gray stripe