Removing The Memory Module(S) - Dell Studio 1569 Service Manual

Hide thumbs Also See for Studio 1569:

Setup manual (90 pages)

User manual (354 pages)

Setup manual (94 pages)

Table Of Contents

Table of Contents

Back to Contents Page

Memory Module(s)

Dell™ Studio™ 1569 Service Manual

Removing the Memory Module(s)

Replacing the Memory Module(s)

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the

Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on the back of the computer).

CAUTION:

To help prevent damage to the system board, remove the main battery (see

computer.

You can increase your computer memory by installing memory modules on the system board. See "Basic Specifications" in your Setup Guide and Comprehensive

Specifications at support.dell.com/manuals for information on the memory supported by your computer.

NOTE:

Memory modules purchased from Dell™ are covered under your computer warranty.

Your computer has two user-accessible SODIMM sockets that you can access from the bottom of the computer.

Removing the Memory Module(s)

1. Follow the procedures in

Before You

2. Remove the battery (see

Removing the

3. Loosen the two captive screws that secure the memory module cover to the computer base.

4. Lift the memory module cover at an angle and ease the tabs out of the computer base.

captive screws (2)