Removing The Coin-Cell Battery; Replacing The Coin-Cell Battery - Dell Studio 1569 Service Manual

Back to Contents Page
Coin-Cell Battery
Dell™ Studio™ 1569 Service Manual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Coin-Cell Battery
1. Follow the procedures in Before You
2. Remove the battery (see Removing the
3. Follow the instructions from
4. Disconnect the coin-cell battery cable from the system board connector.
5. Remove the coin-cell battery from the mylar sleeve on the system board.
1 mylar sleeve
3 coin-cell battery cable
Replacing the Coin-Cell Battery
1. Follow the procedures in Before You
2. Connect the coin-cell battery cable to the system board connector.
3. Slide the coin-cell battery into the mylar sleeve on the system board.
4. Follow the instructions from
5. Replace the battery (see Replacing the
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Begin.
Battery).
step 3 to step 17 in Removing the System
2 coin-cell battery
4 system board connector
Begin.
step 4 to step 23 in Replacing the System
Battery).
Removing the
Board.
Board.
Battery) before working inside the