Entering The Service Tag In The Bios - Dell Studio 1569 Service Manual

Hide thumbs Also See for Studio 1569:
Table of Contents

Advertisement

 
15. Replace the Bluetooth card (see
 
16. Replace the palm rest (see
 
17. Replace the power button panel (see
 
18. Replace the keyboard (see
 
19. Replace the Mini-Card(s) (see
 
20. Replace the memory module(s) (see
 
21. Replace the battery (see
Replacing the
 
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
 
22. Turn on the computer.
NOTE:
After you have replaced the system board, enter the computer's Service Tag into the BIOS of the replacement system board.
 
23. Enter the service tag (see
Entering the Service Tag in the
 Entering the Service Tag in the BIOS
 
1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
 
2. Turn on the computer.
 
3. Press <F2> during POST to enter the system setup program.
 
4. Navigate to the security tab and enter the service tag in the Set Service Tag field.
Back to Contents Page
 
Replacing the Bluetooth
Card).
Replacing the Palm
Rest).
Replacing the Power Button
Replacing the
Keyboard).
Replacing the
Mini-Card(s)).
Replacing the Memory
Module(s)).
Battery).
BIOS).
Panel).

Advertisement

Table of Contents
loading

Table of Contents