Replacing The Mini-Card - Dell Inspiron N4020 Service Manual

1 Mini-Card 2 securing screw 3 antenna cables (2)
9. Remove the screw that secures the Mini-Card to the connector on the I/O board.
10. Lift the Mini-Card out of the I/O board connector.
Replacing the Mini-Card
1. Follow the instructions in
2. Remove the new Mini-Card from its packaging.
CAUTION:
CAUTION:
board, and realign the card.
CAUTION:
3. Insert the Mini-Card connector at a 45-degree angle into the appropriate I/O board connector.
4. Press the other end of the Mini-Card down into the slot on the I/O board and replace the screw that secures the Mini-Card to the I/O board.
5. Connect the appropriate antenna cables to the Mini-Card you are installing. The following table provides the antenna cable color scheme for each Mini-
Card supported by your computer.
Connectors on the Mini-Card
WLAN (2 antenna cables)
Great user manuals database on
Before You Begin.
Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system
To avoid damage to the Mini-Card, never place cables under the card.
Antenna Cable Color Scheme
UserManuals.info