Replacing The Mini-Card(S) - Dell Inspiron N4010 Service Manual

1 Mini-Card 2 screw 3 antenna cables (2)
9. Remove the screw that secures the Mini-Card to the daughter board.
10. Lift the Mini-Card out of the connector on the daughter board.
Replacing the Mini-Card(s)
1. Follow the instructions in
2. Remove the new Mini-Card from its packaging.
CAUTION:
CAUTION:
board, and realign the card.
CAUTION:
3. Insert the Mini-Card connector at a 45-degree angle into the appropriate daughter board connector. For example, the WLAN card connector is labeled
WLAN and so on.
4. Press the other end of the Mini-Card down into the slot on the daughter board and replace the screw that secures the Mini-Card to the daughter board
connector.
5. Connect the appropriate antenna cables to the Mini-Card you are installing. The following table provides the antenna cable color scheme for each Mini-
Card supported by your computer.
Connectors on the Mini-Card
Great user manuals database on
Before You Begin.
Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system
To avoid damage to the Mini-Card, never place cables under the card.
Antenna Cable Color Scheme
UserManuals.info