Table of Contents
Advertisement
1
antenna cable connectors
5. Release the Mini-card by removing the securing screw.
6. Lift the card out of its system board connector.
1
Replacing Mini-Card
NOTICE:
realign the card.
NOTICE:
1. Insert the card connector into the system board connector at a 45-degree angle.
2. Press the other end of the card down into the slot on the system board until the card clicks into place.
3. Replace the securing screw.
4. Connect the cables to the Mini-Card, ensuring that you route the cables correctly.
NOTE:
5. Secure unused antenna cables in the protective mylar sleeve.
6. Replace the cover and tighten the eight captive screws.
Great user manuals database on
2
securing screw
Mini-card
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and
To avoid damage to the Mini-card, never place cables under the card.
For more specific information about which cable to connect to which connector, see the documentation that came with your Mini Card.
UserManuals.info
Advertisement
Table of Contents
