Replacing The System Board - Dell Studio 1569 Service Manual

1 system board assembly
3 pull-tab
5 USB cable
7 computer base
9 pull-tab
16. Carefully ease the connectors on the system board out of the computer base and lift the system board assembly out of the computer base.
17. Turn the system board assembly over.
18. Follow the instructions from
19. Remove the processor heat sink (see
20. Remove the processor module (see
Replacing the System Board
1. Follow the procedures in Before You
2. Replace the processor module (see
3. Replace the processor heat sink (see
4. Ensure that the Mini-Card antenna cables are attached to the computer base.
5. Follow the instructions from
6. Connect the hard drive cable and the USB cable to the system board connectors.
7. Turn the system board assembly over and align the connectors on the system board with the slots in the computer base.
8. Connect the display cable to the system board connector.
9. Connect the audio cable to the system board connector.
10. Replace the three screws that secure the system board to the computer base.
11. Replace the speakers (see Replacing the
12. Replace the processor fan (see
13. Replace the optical drive (see
14. Replace the hard drive (see
2 screws (3)
4 display cable
6 pull-tab
8 hard drive cable
step 4 to step 5 in Removing the Coin-Cell
Removing the Processor Heat
Removing the Processor Module).
Begin.
Replacing the Processor Module).
Replacing the Processor Heat
step 2 to step 3 in Replacing the Coin-Cell
Speakers) and route the USB cable in the routing guides on the right speaker.
Replacing the Processor Fan).
Replacing the Optical Drive).
Replacing the Hard Drive).
Battery.
Sink).
Sink).
Battery.