Dell Studio 1569 Service Manual page 47

Replacing the USB/Audio Board
1. Follow the procedures in Before You
2. Place the USB/audio board on the computer base.
3. Replace the three screws that secure the USB/audio board to the computer base.
4. Slide the audio cable into the USB/audio board connector and press down on the connector latch to secure the cable.
5. Connect the speaker cable to the USB/audio board connector.
6. Connect the USB cable to the USB/audio board connector.
7. Replace the palm rest (see
8. Replace the keyboard (see
9. Replace the power button panel (see
10. Replace the battery (see Replacing the
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Palm Rest).
Replacing the Keyboard).
Replacing the Power Button
Battery).
Panel).