Replacing The Optical Drive - Dell Studio 1569 Service Manual

Hide thumbs Also See for Studio 1569:
Table of Contents

Advertisement

1
optical drive assembly
 
8. Disconnect the optical drive interposer from the optical drive.
 
9. Remove the four screws (two on each side) that secure the optical drive brackets to the optical drive.
1
optical drive
2
3
screws (4)
4
 Replacing the Optical Drive
 
1. Follow the procedures in
Before You
 
2. Replace the four screws (two on each side) that secure the optical drive brackets to the optical drive.
 
3. Connect the optical drive interposer to the optical drive.
 
4. Place the optical drive assembly in the computer base.
 
5. Replace the five screws that secure the optical drive to the computer base.
 
6. Replace the palm rest (see
 
7. Replace the keyboard (see
 
8. Replace the power button panel (see
 
9. Turn the computer over and replace the screw that secures the optical drive assembly to the computer base.
 
10. Replace the battery (see
Replacing the
 
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
 
2
screws (5)
brackets (2)
optical drive interposer
Begin.
Replacing the Palm
Rest).
Replacing the
Keyboard).
Replacing the Power Button
Battery).
Panel).

Advertisement

Table of Contents
loading

Table of Contents