Arrival Profile - Wavetronix Click 65 Series User Manual

Note. The controls
will be grayed out
while the table is
being updated.
The amount of time
required to update
the table will vary
based on the interval
of time you chose
to display data for.
Click 65x User Guide
38
•

Arrival Profile

The Arrival Profile tab generates a bar graph showing the number
of vehicles arriving on red vs. those arriving on green, over time.
This lets you see how vehicles are arriving in relation to the start of
green at this intersection. Having this easy-to-create arrival profile
graph allows anyone to quickly verify the efficiency of the intersec-
tion. This can be very useful in checking any manual adjustments
made to the timing of the intersection. If the arrival profile is not
ideal, a quick change can be made and this graph can be easily
created again to see if the profile has improved.
The x axis of the graph shows five-second intervals of time, starting
the moment the light turns red, for the next 2 minutes and 30 sec-
onds. Any counts after that time are put in the ++++ bin at the end.
To configure this, use the box on the left side of the screen to set
the Duration of time, Date, and Start Time of the data you want
used to generate the graph. Use the BIU and Channel drop-
downs to choose which channel's data to use. Then click Update.
The green bars show the number of cars in each time bin that had
a green light when they arrived at the intersection; the red bars
show the same but for red lights. You can hide either sort of bar by
clicking on their entries in the legend above the graph; click again
to reveal them again.
Figure 26. Arrival Profile tab