Graphs Tab; Data Summary - Wavetronix Click 65 Series User Manual

Graphs tab

The Graphs tab can generate tables and graphs for volumes
(counts) and arrival on green data, based on the last thirty-one
days' worth of data.
Be aware that for Arrival Profile information to be meaningful, the
back of the traffic queue should not extend to the detection zone.
Because the Advance has a much larger range than the Matrix,
and can therefore have detection zones that are much farther from
the intersection, it will provide more reliable arrival statistics.

Data Summary

The first tab you see on the Graphs screen is Data Summary. Here
you can generate a table with volume and arrival on green per-
centages; this provides a quick overview of what's happening. This
graph is useful if you want to see a general summary of the data
being generated at this intersection. The Count Details and Arrival
Profile graphs provide more detailed data.
To generate a data summary table:
Go to the data selection box on the left side of the screen.
1
Use the Date drop-down to select the date for which you want
2
Figure 24. Graphs tab
Note. If a phase has
not been assigned
to a given channel
in the Channels
tab, the AoG will
not be calculated
for that channel
and it will show a
series of dashes
and zeroes, as seen
on several rows in
the image above.
Chapter 4: Web Interface
35
•