Properties Tab - Wavetronix Click 65 Series User Manual

Note. BIU IDs need
to be unique across
all cabinet devices
communicating to
the controller. It's
recommended that
you disable unused
BIU IDs within the
Click 65x so that
other cabinet devices
may have access
to that ID without
communication
conflicts.
Click 65x User Guide
26
•

Properties tab

The Properties tab contains basic configuration information about
the Click 65x device, with the ability to edit many of those fields
directly from this screen.
Serial Number – The registered serial number for this device.
˿
This field cannot be edited.
FW Version – The current version of firmware running on the
˿
device. This field cannot be edited.
OS Build Date – The date/time stamp of the firmware. This field
˿
cannot be edited.
MAC Address – Network MAC address assigned to this device.
˿
This field cannot be edited.
Ethernet/Control IP Port – The port number to use when con-
˿
necting to a sensor using SmartSensor Manager (default: 10001).
Name, Location, Description – These fields can be used to
˿
identify the purpose and location of the device. Each field is
limited to 30 characters and may be left blank. The content of
these fields has no impact on device functionality.
IP Address – The registered IP address for the device can be
˿
changed. Each field requires a number between 0 and 255.
Subnet Mask – The registered subnet mask for the local net-
˿
work. Each field requires a number between 0 and 255.
Default Gateway – The gateway IP address for the local network.
˿
Each numerical field requires a number between 0 and 255.
Enable BIU – These checkboxes can activate or deactivate
˿
any of the eligible BIU (Bus Interface Units) within the Click 65x
configuration.
Figure 16. Properties tab