Channels Tab - Wavetronix Click 65 Series User Manual

Note. The Location,
Description, and
Approach fields
are taken from the
sensor itself, and
are not editable
through the Click
65x web interface.
Use the appropriate
SmartSensor
Manager software
package to change
those settings.
Click 65x User Guide
28
•
Make sure the devices are discovered; each device will be
5
listed in their own identification box in the Available Sensors
section. Sensors will be listed as "Sensor X" with X being
the number of the port to which the sensor is attached. The
label will be accompanied by the appropriate sensor picture
for Matrix or Advance. The sensor listing will also provide the
device serial number, along with Location and Description
fields. Matrix devices will also have an Approach field.
Type a name in the Name field. This is an optional field that can
6
be used to create a convenient and user-friendly name to iden-
tify this device within the Click 65x web interface. This field is
limited to 30 characters and can be left blank.
Click the Save Sensor Names button on top.
7
This screen also lists the most current communication status for
each device, along with when the device was first discovered.

Channels tab

The Channels tab is where you map the incoming sensor chan-
nels from any of the four attached sensors to outgoing detector
channels.
Figure 18. Channels tab