Web Interface - Wavetronix Click 65 Series User Manual

The Click 65x web interface is the primary mechanism for access-
ing Click 65x functionality. The web interface provides many
options that cannot be accessed using the front panel OLED.
The web interface can be accessed by typing the device IP
address into a web browser. (Remove any leading zeroes when
typing in the IP address, i.e. "10.10.0.1", not "010.010.000.001".)
Any device with a web browser—tablet, laptop, workstation, smart-
phone—can access the Click 65x web Interface provided the
device is connected to the same local network.
The main interface header contains links to each interface tab: Prop-
erties, Sensors, Channels, Verification, and Health. The default
tab will usually be Health as the primary starting point for operators
wanting to view the current status of all attached sensors.
4

Web Interface

Note. Before
connecting to the
web interface,
connect the Click 65x
to the local network
and set its network
information using
the OLED panel as
in Chapter 3 above.
Note. This section
shows screenshots
from the 650 web
interface. The 656
web interface is
identical, except
for a few spots
where there will
be functionality for
talking to six sensors
instead of four..
Chapter 4: Web Interface
25
•