Biu Setup - Wavetronix Click 65 Series User Manual

Note. BIU IDs are
shared across all
equipment that
communicates to
the controller. BIU
ID numbers that are
unused within the
Click 650 should be
disabled to allow
other potential
cabinet equipment
access to that ID
number to prevent
controller conflicts.
The number of BIU
IDs in use has no
direct relationship
to the number of
sensors attached to
the Click 65x: one
or more BIU IDs
may be disabled
no matter how
many sensors are
attached to the unit.
Click 65x User Guide
22
•
check) button to save the network configuration. Push the
Cancel (red X) button to return to the main menu without saving.
The fields that can be edited on this screen are as follows:
IP Address – Displays the IP address assigned to this device
˿
on the local network. Displayed in XXX.XXX.XXX.XXX format,
with each XXX being between 000 and 255.
Subnet Mask – Displays the subnet mask used (if any) for net-
˿
work communication. Displayed in XXX.XXX.XXX.XXX format,
with each XXX being between 000 and 255.
Default Gateway – Displays the network gateway used on the
˿
local network. Displayed in XXX.XXX.XXX.XXX format, with
each XXX being between 000 and 255.

BIU Setup

The BIU Setup screen allows each of the possible BIUs (Bus
Figure 11. BIU Setup