Verification Tab - Wavetronix Click 65 Series User Manual

Verification tab

The Verification tab allows you to check the current detection
mappings using real-time data coming from the sensors. The Chan-
nel Verification box contains a 4x4 grid that displays all 16 possible
detection channels for the selected BIU.
The Verification tab will be updated in real time, so you will see
the channel activations trigger on and off as vehicle detections are
made by the attached sensors. Below is an explanation of the cir-
cles within the grid:
White circle – A detector channel that does not have a
˿
mapping.
Gray circle – Detector channels with a current mapping (if the
˿
detector signal is currently inactive).
Red circle – Detector channels with a current mapping (if the
˿
detector signal is currently active).
Click a detection circle to display the current sensor channel map-
ping below the grid. The text displayed to identify each sensor can
be adjusted by selecting an option from the Display... drop-down
box. The details box will also contain the phase mapping and
description field (if any). Detector channels with multiple sensor
channels assigned will display the details for each.
If a mapping exists, but the Click 65x is unable to communicate
with the registered sensor, the interface will display a red circle
with a large "X", indicating non-functional status.
Figure 21. Verification tab
Chapter 4: Web Interface
33
•