Health Tab - Wavetronix Click 65 Series User Manual

Health tab

Figure 22. Health tab
The Health tab allows you to check current sensor health and
status for all attached sensors. This tab will be the default tab seen
when you first log into the Click 65x web interface.
All sensors discovered and registered to the Click 65x will have an
individual listing with its name, location, description, approach and
serial number. The health listings also display the last time the Click
65x was able to communicate with each sensor in the Communica-
tion Status. Normal usage will display "OK, Communicating", while
a drop in communication will display the timestamp of the last data
packet received from the sensor. If the time between the last data
packet and the present time exceeds the failsafe timeout (see the
Admin section below), the sensor picture on the health display will
be shown with a red "X", as shown below, showing the device is
considered to be in failsafe condition.
Figure 23. Sensor verification failure
Click 65x User Guide
34
•